Water and oil wood repellant
SurfaPore W is a combination of active ingredients
that repel water and oil stains providing excellent
dimensional stability even in the most humid
environment.
GENERAL CHARACTERISTICS
SurfaPore W is a water based formulation, specifically
designed to harness the power of nanotechnology in
order to preserve absorptive wooden surfaces. By
making wood water resistant, it assures dimensional
stability and protection against warping and decay.
Additionally, it provides oil repellency in order to
prevent oily stains from penetrating wood surfaces.
SurfaPore W has been successfully used as an
additive (10% dilution ratio) in pressure-treatment
solutions to protect wood. The application of
SurfaPore W does not induce any visible change on
the surface applied and does not block the pores (no
pore sealing like traditional varnishes or wood
stains). Thus, the breathing ability of the natural
wood surface is preserved.
SURFACE APPLICATIONS
Absorptive wooden surfaces: Fences/posts, roof
shingles, garden furniture/sheds, decking &
docks,fences/posts, facades.
APPLICATION NOTE
Applicable on natural, absorptive wooden surfaces.
Remove any varnish or wood stain residues before
applying SurfaPore W. The application surface should
be dry and clean. Shake well before use. SurfaPore W
is ready to use; no need to dilute before applying.
Apply SurfaPore W by brush, roller or spraying.
Maximum performance is reached 24h after
application. In case of very absorptive surfaces,
reapply within 2 hours. Application temperature:
10-35oC (50-95oF).
Coverage: 8-10
m² per Liter, strogly dependant on the properties of
the surface applied.
Wood Stain or
Varnish Application: Let
SurfaPore W cure for at least 72h before
application. Applying wood varnish or stain on a
SurfaPore W treated surface might affect their
colour or adherence. Test results on a small area
before full scale application.
